Task 2: Set up form properties
1
|
2
|
In the Form tab, type the number of forms you want to print per page.
|
3
|
Select the required type of paper from the Paper list.
|
4
|
Set the size and margins for the form. Note that If you are printing four cheques per 11x17-inch page, type the width and height of a single cheque and not the width and height of the 11x17-inch page.
|
a
|
make the grid visible in the layout, select Show Grid. Note that the grid will not be printed.
|
b
|
align the top and left margins of fields with the closest grid lines when you are repositioning them, select Snap to Grid.
|
c
|
change the spacing between the grid lines, make a selection from the Grid Size menu.
|
a
|
c
|
Select the Display settings for the graphic.
|
■
|
Top will position the image at the top of the form.
|
■
|
Centre will centre the image on the form.
|
■
|
Tile will repeat the image in a grid-like pattern across and down the entire form.
|
■
|
Stretch will enlarge the image to fill the entire form. (Depending on its size and shape, this setting can distort the image.)
|